Filter by:
669 results:
Simultaneous process monitoring of up to 6 measuring components
- Simultaneous measurement of up to 6 components
- Process cells up to 60 bar and 200 °C available
- Automated sample point switching
- Integrated adjustment unit (optional)
- Protective devices for measurement of toxic or flammable mixtures
- Extended operation via PC and SOPAS ET software
- Flexible I/O module system
Adjustable individual thresholds
- The register is controlled with individual thresholds
- Unique housing: one screw mounting
- Tight dual-sensor mounting ability
- Detects 1-18 marks of different colors
- Easy teach-in via button
Intuitive configuration software for safety products from SICK
- Process-oriented, intuitive step-by-step configuration for many SICK safety products
- Verification and reporting – for each device individually or for the entire project
- Comprehensive diagnostics including data recorder
- Compliance with established global safety standards
Position sensors for T-slot
- Position sensor for direct mounting in T-slots on pneumatic cylinders
- Sensor variants with measuring ranges of 32 mm to 256 mm
- Analog outputs (for current or voltage), switching output, and IO-Link
- Mounting on other cylinder types (e.g., round body cylinders) is possible with adapters
- Measurement of length, width and height of any shaped object
- Calculation of the smallest enclosing cube (box volume)
- Calculation of real volume
- Optimized application software
- All measuring functions are built in the measuring head, no additional evaluation unit is required
Retro-reflective light grids for the detection of very fast and transparent objects
- 0.6 ms response time
- Eight visible transmitter LEDs
- Up to eight PNP switching outputs and one alarm output
- Sensitivity can be set via a potentiometer
- Polarizing filter for reflective surfaces
High-resolution and high-speed detection of the smallest objects
- 2 mm resolution
- Response time 3 ms
- Detection height 50 mm
- Cable synchronization
- PNP or NPN with Q or Qnot outputs (NO/NC)
- 1 x test, 1 x teach-in input
- M12 male connector, 8-pin
The sturdy light grid for many standard applications
- Up to 128 beams
- Different beam resolutions 10 mm, 30 mm and 60 mm
- High operating reserve for scanning ranges up to 12 m
- Potentiometer for sensitivity adjustment
- Ambient light immunity up to 150,000 lux
- Tough aluminum housing
- PNP/NPN, relay output and a test input
- Optical synchronization
Inspection of defined functions
- Inspection of ambient conditions, damage, alignment and contamination of the SICK product
- Inspection of performance
- Function and communication test
Creating MID conformity for billable systems
- Inspection of system for conformity according to the relevant EU-type examination certificate
- Metrological tests carried out
- System protected against manipulation by attaching the prescribed labels and securing elements
- Testing documentation produced and handover of compliance documents
Inspection, maintenance and restoration of defined functions
- Inspection of ambient conditions, damage, alignment, and contamination of SICK components and systems
- Restoration of defined functions
- Inspection and adjustment of application-specific parameters (except for calibrated systems)
- Archiving of parameters, acceptance test, and handover to the personnel
The specialist for high-speed applications
- Infrared light source
- Simple and precise setting of the switching threshold via IO-Link, teach-in button, or plus/minus buttons
- Fast response time: 100 μs
- PNP and NPN switching output
- Light/dark switching function
- Stable aluminum housing with IP 65 enclosure rating
- Smart sensor with integrated IO-Link interface
The clear choice for detecting transparent labels
- Detection of transparent, opaque or printed labels
- Unaffected by metallic foils and labels
- Fast response time of 250 µs
- Simple and accurate adjustment via teach-in button, or plus/minus buttons
- Rugged, IP 65 aluminum housing
Collision measurement for collaborative robots
- Efficient measurement of force and pressure by certified safety specialists from SICK
- Documentation in compliance with ISO/TS 15066 including an overview of upheld and exceeded limit values
- Expert knowledge in Safe Robotics: SICK provides support in interpreting measurement results
The atmosphere must be just right
- Certified according to IECEx and ANZEx
- Reliable, continuous measurement (24/7)
- Automated switching between modular expandable measuring points for up to 40 sites
- Automated alarm and alarm report
- Self-contained, transportable system
Reliable measurement of greenhouse gases for precise determination of emission taxes
- Reliable measurement with low measurement uncertainty.
- Automated switching between up to 5 sample points
- Software package for calculating and recording the total greenhouse gas emission
- Flow rate, pressure, and temperature measurement using IECEx Zone 1 devices
- Available as a standalone cabinet or integrated into MINESIC700 TBS
For the efficient prioritization of safety-related modernization measures
- Safety-related evaluation of production plants
- Summary of the biggest safety deficits on individual machines
- Support in prioritizing safety-related modernization measures based on the machines and measures
- Assistance with estimating the budget for safety-related retrofitting measures
The compact device solution for non-contact flow measurement in tunnels
- Modern ultrasonic technology for non-contact measurement
- Large measuring range
- Compact device design
- Very easy mounting and commissioning
- Immune to contamination
The flexible wire draw encoder for indoor and outdoor areas
- Measuring range: up to 3 m
- Compact housing
- Modular measuring system with a wide selection of interfaces
- Rugged wire with 0.81 mm diameter; optional dirt scraper
- High retraction force
- Accessories for individual measuring wire guide
Ready for explosive atmospheres
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- ATEX II 3G / 3D (2/22 zones)
- ATEX for gas: II 3G Ex nA op is IIC T4 Gc X
- ATEX for dust: II 3D Ex tc IIIC T135 °C Dc
- 7-segment display
- Beam coding for accurate system allocation
- Configuration and diagnostics via PC
- External device monitoring (EDM) and restart interlock
1D code identification using a compact scanner for standard applications
- Extremely compact
- Lightweight
- Easy commissioning
- Fast and reliable decoding even on poorly printed or partly damaged codes
- Available as RS-232 variant with flying leads and as USB variant
- Pushbutton trigger
- One trigger input and two digital outputs for good read/no read outputs (for RS-232 variant only)
- CLV505 available in raster version
Compact type for optimum integration into safety applications up to type 2
- Type 2 (IEC 61496), SIL1 (IEC 61508), PL c (EN ISO 13849), only in conjunction with suitable testing device, e.g., Flexi Classic or Flexi Soft
- Compact size with ranges up to 18 m
- Plastic housing, ABS
- Enclosure rating IP 67
- Temperature range from –40 °C to +60 °C
Standard type and long ranges for safety applications up to type 2
- Type 2 (IEC 61496), SIL1 (IEC 61508), PL c (EN ISO 13849), only in conjunction with suitable testing device, e.g., Flexi Classic or Flexi Soft
- Compact size with ranges up to 35 m
- Integrated heating
- Enclosure rating IP 67
- Temperature range from –40 °C to +60 °C