Filter by:
665 results:
- Rope lengths up to 30 m, with rope break and rope pull function
- Metal housing with integrated rotary unlocking lever and tension display
- Available with M20 X 1.5 cable entry gland or Flexi Loop-compatible M12 plug connector (depending on variant)
- Slow-action switching elements with four contacts
- Complies to the standards EN ISO 13850 and IEC/EN 60947-5-5
- Optionally available as a built-in version or as a surface-mounted version with housing
- Built-in version with self-monitoring emergency stop contacts
- Status display with colored mark or LED ring illumination
- Variants with protective collar
- Variants with M12 male connector
- Flexible mounting on all standard profiles
- Flexible fieldbus connection for PROFIBUS DP, PROFINET and EtherCAT (type-dependent)
- Encoding switch for setting bus address and operating mode (type-dependent)
- LEDs for status and diagnostics
- Plug-in electrical connections
- Integrated parameter memory for connected sensors
- Compact and flexible
- Certified measurement accuracy of up to 5 mm x 5 mm x 2 mm (L x W x H)
- Detects object sizes up to 2,600 mm x 1,000 mm x 1,000 mm (L x W x H) depending on system variant
- Conveyor speed of more than 2 m/s possible
- Easy to integrate thanks to MSC800 controller
- Real-time visualization of protective fields and measurement data on HMIs and PCs
- Read-out and display of the event memory of the safety laser scanner
- Direct access to diagnostic and device information
- For Windows-based SCADA systems (e.g. WinCC from SIEMENS) and Windows PCs
- Supported devices: microScan3 and outdoorScan3
- Quality components
- Modular flexible installation
- Non-contact ultrasonic technology without pressure loss
- Measuring range span greater than 100 : 1
- Sensors can be replaced under pressure
- Low sensitivity to pulsation and pressure regulator noise
- Remote electronics (max. 15 m)
- Bi-directional measurement with automated diagnostics
- Sensor hub with a maximum of 2 inputs for external sensors
- The sensor data is integrated in to the motion control system via HIPERFACE DSL®.
- Collection of vibration, temperature, speed, position and service life histogram of the servo motor (combined with EDS/EDM35)
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- Robust housing with three mounting grooves
- Wide scanning range, up to 70 m
- External device monitoring (EDM), restart interlock, application diagnostic output, SDL interface
- Muting in combination with the UE403 muting switching amplifier
- 7-segment display
- Configuration and diagnostics via PC
- Optional integration features: laser alignment aid, LED
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- Robust housing with three mounting grooves
- Wide scanning range, up to 70 m
- External device monitoring (EDM), restart interlock and application diagnostic output
- Standardized M12 connectivity
- 7-segment display
- Configuration keys located directly on the device
- Optional integration features: laser alignment aid, LED or Actuator Sensor Interface
- Contact pressure can be adjusted manually from 0-24 N in 6 steps
- Compact axle spacing (120 mm) for flexible installation options
- Maintenance position can be reached manually
- Selection of various measuring wheel surfaces and diameters
- Incremental or absolute encoder interfaces can be combined
- Measurement accuracy ± 5 mm x 5 mm x 2 mm, scale resolution up to ± 2 g
- Scanning of 1D and 2D codes
- Maximum object size of 600 mm x 500 mm x 400 mm up to 800 mm x 500 mm x 200 mm
- Automatic start-up of the measurement process
- 3D vision based measurement with color image capture
- Central controller with customizable options
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- Modular, expandable housing design with reliable ABS plastic
- No blind zones
- Protective field heights between 210 mm and 1,050 mm
- Scanning range: 0.4 m to 3.2 m
- Resolution: 17 mm and 30 mm
- Direct mounting or with alignment brackets
- Adapter for laser alignment aid AR60
- Sender and receiver in a single housing
- 5 different fork widths from 30 mm to max. 180 mm
- High switching frequency of 5 kHz
- Minimum detectable object (MDO) of 0.5 mm
- Durable hybrid housing made from ABS with carbon steel frame
- Sensitivity adjustment
- Light/dark switching
- Push-pull output
- Accuracy of +/- 2 mm with a maximum resolution of 0.1 mm
- Measuring ranges from 0.05 m up to 80 m on white and up to 14 m on black
- IO-Link V1.1, analog and digital output
- TFT color display and user-friendly menu navigation
- Elegant metal housing in proven design
- Protection class IP 65 and IP 67
- Reusable existing accessories
- Different housing shapes based on standardized M18 design
- Housing made of either plastic or metal
- Bright, multi-color status LED
- PinPoint LED and intelligent, interference-resistant signal evaluation
- High tightening torque of the fully-flush variant
- Position feedback with a measuring range of up to 50 mm
- Up to 3 digital switching signals
- 8 switching points via IO-Link
- Dynamic teach-in for up to 3 switching signals
- Actuator diagnosis data: piston velocity, cylinder stroke, magnetic field strengths, etc.
- Process diagnosis data: temperature, vibration, position, max. acceleration
- Highly efficient ultrasonic transducer - up to gas temperatures of 280 °C and pressures up to 450 bar
- Direct path layout
- Intelligent self-diagnostics
- Compact, robust design
- Integrated log book and data logger
- Large measuring range 1:120
- Bidirectional measurement
- Low power consumption: <1 W
- Interfaces to the cloud and PLC as well as cameras, illumination, and various sensors
- Fieldbus support offers PROFINET and EtherNet/IP
- SICK Algorithm API and HALCON library for image processing
- SICK Nova for configuring machine vision users
- Enclosure rating IP65 or IP20
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- Rugged construction
- Universal application possibilities
- Ranges up to 70 m
- Relay outputs
- Front screen heating
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849), only in conjunction with suitable testing device, e.g., Flexi Classic or Flexi Soft
- Small M18 sensors with ranges up to 10 m
- Compact M30 sensors with ranges up to 60 m
- Enclosure rating IP 67
- Temperature range from –40 °C ... +55 °C
- Radial optics (90° deflector mirror)
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849), only in conjunction with UE401
- Small M18 sensors with ranges up to 10 m
- Compact M30 sensors with ranges up to 60 m
- Enclosure rating IP 67
- Temperature range from –20 °C ... 55 °C
- Narrow evaluation device (22.5 mm) with external device monitoring (EDM) and restart interlock (RES)
- Fast response time of max. 30 ms
- Up to 8 sensors can be cascaded
- Visualization of safety systems
- Real time display of system status, errors, KPIs
- Recording and analysis of safety-related events
- Browser-based user interface for display on HMIs, computers, tablets, etc.
- Dashboard for the management of several safety systems
- User management for access rights
- Type 2 (IEC 61496), SIL1 (IEC 61508), PL c (EN ISO 13849), only in conjunction suitable testing device, e.g., Flexi Classic or Flexi Soft
- Small M18 sensors with ranges up to 10 m
- Compact M30 sensors with ranges up to 60 m
- Enclosure rating IP 67
- Temperature range from –40 °C ... 55 °C
- Metal and plastic version
- Radial optics (90° deflector mirror)
- Straightforward diagnostics and service
- 2/4 megapixel resolution; high frame repetition rate of 40 Hz
- Dynamic focus adjustment from object to object
- Integrated high-power LED illumination
- Function buttons, aiming laser, optical and acoustic feedback signal
- Intelligent, rapid decoding algorithms